Disposable Vape Boxes.

A slim tuck carton is the standard, and a blister card is the option when you want the device visible on a peg wall. Both are built around one sealed unit and sized for counter and peg display.

The blister card shows the device itself, which some brands want on a crowded wall. The carton gives you more printable panel for the required text and suits most convenience retail.

We'd always fit one, because a device that rattles in its carton reads as a defect to the buyer. A simple paperboard cradle holds the device still and centred, so it slides out the same way every time.

The insert also stops the device pressing against the end flaps in transit, which keeps the tuck from bulging and the seal from lifting.

Yes, we build counter trays that hold ten units at the till, printed to match the single cartons. The tray arrives flat and folds into an open display that sits beside the register.

Loaded trays get knocked around at checkout, so we specify them on heavier board than the single cartons. The shipping cartons for trays can carry lithium battery transport marks where your carrier needs them.

We apply a tamper-evident label across the opening flap that tears visibly when the carton is opened. In this category a broken seal suggests the device may have been used, so retailers expect every unit sealed before it reaches the shelf.

We can add authentication codes on the same seal or on the carton, which help buyers tell licensed stock from grey-market copies.

Less than on most cartons, because the required warning takes a large share of the main panels before design begins. We lay out the space for the marks your market requires first, then fit the brand into what remains.

Flavour is what the eye goes to, with puff count and strength at hero size so a buyer can compare quickly. Strong colour, spot UV and foil on the brand mark make the most of a small panel.

Our common single carton measures 1.2 × 0.6 × 4.3 inches, which fits most slim disposables. Devices vary in width and length, so we size the inside of the carton to your actual unit plus the insert.

Send us a device or its drawing and we'll return a dieline. The same measurements set the pocket spacing on a ten-count display tray.

Yes, 500 cartons is our minimum for this style. With several flavours, the structure and insert stay the same across the range and only the printed panel changes.

Our design team sets up the dieline and the space for required text at no cost, which saves time when a new flavour needs a carton at short notice.

Expect 7 to 10 business days from the approved proof, with a rush option of 5 to 7 business days for fast-moving flavours. Disposables have a short retail life and reorders come often, so we keep your dieline on file for the next run.

Samples take 5 to 7 business days, and the fee is set against the bulk order once you go ahead.