Cannabis Mylar Bags.

Because the test under 16 CFR 1700.20 is run on the finished pack, so the certificate covers the zipper and the laminate as one configuration. Substituting a cheaper film under the same zipper produces a different pack that the certificate no longer describes. That is the detail most often lost when a specification is value-engineered.

We hold the approved combination on every reorder and supply the test documentation with the order.

A heat-seal bag is opened once and is not resealed. A zipper bag opens and closes repeatedly to the same standard. Pre-weighed single-use packs use the heat seal as the tamper-evident unit. Most retail flower goes into a resealable pouch because it is used across several sessions, and on those the zipper is the certified CR closure.

Both carry a heat seal above the zipper that breaks on first opening.

A PET, aluminium and PE foil laminate, which is the structure that meets odour containment expectations. Foil holds odour and light out and keeps oxygen away from what is inside. A metallised BOPP, VMPET and LLDPE laminate costs less and is weaker on odour, so check it against your programme before switching.

Film gauge runs 0.12 to 0.20 millimetres, heavier than a food bag of the same size, and there is no clear window on this format.

The layout reserves the warning-mark area first and the brand design is built around it. The panel has room for the required marks at legible size, and brands that treat that panel as part of the visual system get a cleaner result than those who add it last. Opaque film, where a state calls for it, gives the design more surface rather than less.

We work from the label spec your compliance team supplies and check the artwork against it before print.

Matte lamination is the category default, restrained and well clear of child-appeal restrictions. Soft-touch is the current signal for top-shelf product. Hot foil reads high-contrast on matte black, spot gloss adds a mark without adding colour, and a registered embossed texture survives handling.

Print is gravure CMYK plus Pantone. Batch and lot codes are overprinted at fill.

A 3 by 4.5 inch bag suits a 1 gram fill, 3.5 by 4.5 inches suits an eighth, and 5 by 8 inches suits an ounce. Fills of 7 and 14 grams sit between. Bags are sized to the volume of the material and not the weight, because density varies between batches.

Give us the densest and the fluffiest product you sell and we size the range so both fit.

Five hundred bags per size and finish is the minimum. Tiers begin above 1,000 and the ceiling is 100,000 per run. For a dispensary moving a few hundred units a month per line, the minimum covers a sensible stock period without tying up cash in film.

Each size in a range is its own run.

Standard production is 7 to 10 business days from approved artwork, and the CR configuration is checked against the certificate in that window. A rush lane at 5 to 7 business days exists for a fixed drop. Samples ship in 5 to 7 business days, and we suggest running the zipper through a few open-and-close cycles with product in the bag.

The sample charge is credited on production. Shipping is USA-wide.