CBD Oil Boxes.

A collar insert is our usual choice, holding the bottle upright at the neck and keeping the glass off the carton walls. When the tuck closes it holds the bottle down against the collar so it can't bounce.

The dropper bulb still needs clearance with the box shut, since a flap pressing on it is a common spec error that damages caps. For a premium reveal, we centre the bottle with its label facing forward.

Keep one graphic system across the range and change the colour by strength, so buyers can tell a low-potency bottle from a high one at a glance. Lighter tones for low strengths and deeper tones for high ones is a common way to do it.

If every strength uses the same bottle, one dieline covers the whole range. Where sizes change, we adjust the structure and keep the artwork consistent.

Yes, and in this category a seal across the tuck flap is expected. It breaks on first opening, so a customer knows nobody has been into the box.

We print the seal in your brand colours or leave it clear. A child-resistant closure on the bottle is a separate layer, and the carton can be sized to take a taller CR cap.

Match the design to your customer rather than defaulting to generic hemp-leaf green. White, clinical layouts suit sleep and functional wellness lines, earth tones and kraft suit lifestyle buyers, and minimal premium design suits a self-care positioning.

Soft-touch matte gives the wellness-premium feel, and we print the mg figure large as the comparison number. Abstract pattern or ingredient photography stands apart from the leaf imagery most of the shelf already uses.

For a 15ml bottle the carton is usually about 1.3 × 1.3 × 3.7 in, and for 30ml about 1.6 × 1.6 × 4.3 in. These are narrow, tall cartons, so we check stability once the insert is in.

Send your bottle with the dropper fitted and we'll finalise the size, allowing for the collar and some headroom over the bulb.

We print CBD oil cartons from 500 units upward. A range with several strengths can go all the way to 100,000.

Starting at 500 is a practical way to test a new potency or bottle size on the shelf before you order for the whole line. Dieline setup and design help are free on every order.

Your CBD oil boxes are produced within 7 to 10 business days of proof approval. On a tight launch, rush production takes 5 to 7 business days.

Samples need 5 to 7 business days, and we'd use them to check the collar insert and dropper clearance on a filled bottle. The cost of those samples is taken off the bulk invoice when you go ahead.

It fits well, since sustainability and wellness sit naturally together for most CBD buyers. We make these cartons on PCW recycled board or kraft, and our recyclable eco board keeps the whole carton in the paper stream.

A paperboard collar instead of a plastic insert helps too. If you print a recycled-content claim, we confirm the board grade on the proof so the claim matches what we actually run.