
Mylar Comic Bags.
Final price depends on size, material, finish and quantity. Your packaging manager confirms it before production.
Your custom box, quoted.
The full specification book.
Six chapters. Six colours. Click a tab to turn the page.
Mylar Comic Bags
Archival polyester that is chemically stable, so the bag does nothing to the book over decades.
Here mylar means what it originally meant: polyester film free of the plasticisers and acids that migrate out of cheaper sleeves. That distinction is the entire purchase decision.

Every detail. Intentional.
Chemically stable film
No yellowing, embrittling or off-gassing.
Not PP or PVC
Cheaper sleeves migrate into the paper.
Sized by era
Current, Silver, Golden and magazine trims differ.
2 mil or 4 mil
General storage, or long-term archiving.
Boards do the bending work
The sleeve alone will not stop a flex.
Acid-free throughout
Including whatever sits behind the book.

Built like architecture.
Every order of Mylar Comic Bags is an engineered build, measured, dieline-cut and hand-wrapped to spec. Below is the standard build sheet.
✦ Need a custom spec? Talk to our atelier. Every detail is negotiable.
Every surface, hand-selected.
What this product is built from, and the surfaces it takes. Below the build sheet sits the full swatch library. Every option applies across our range, and a physical swatch set is available on request.
Material
The board and paper your box is built from.
◷ FINISH
◷ FINISH
◷ FINISH
◷ FINISH
◷ FINISH
◷ FINISH
◷ FINISH
◷ FINISH
◷ FINISH
◷ FINISH
◷ FINISH
◷ FINISHFinishes
How the outer surface looks, feels, and catches light.
◷ FINISH
◷ FINISH
◷ FINISH
◷ FINISH
◷ FINISH
◷ FINISH
◷ FINISH
◷ FINISH
◷ FINISH
◷ FINISH
◷ FINISH
◷ FINISHAdd-ons
Closures, linings, and hardware that complete the build.
◷ FINISH
◷ FINISH
◷ FINISH
◷ FINISH
◷ FINISH
◷ FINISH
◷ FINISH
◷ FINISH
◷ FINISH
◷ FINISH
◷ FINISH
◷ FINISH
◷ FINISH
◷ FINISH
◷ FINISH
◷ FINISH✦ Mix and match across all three and we'll build your exact combination.
The full kit of capabilities.
Sizing & dieline.
Every Mylar Comic Bags is made to your fill, not pulled off a shelf. A pouch is quoted width × length. Tell us what goes inside and how much of it, and we return a measured spec, free, before you commit to anything.
A pouch is sized by what goes in it, not by outside dimensions. Give us the fill weight and, if you can, the bulk, since 500 g of granola needs far more bag than 500 g of powder.
We quote width × length. Flat pouches need no gusset figure, because the bag lies flat when empty.
Zipper or heat seal only, valve or no valve, window or full barrier. These change the film and the bag height, so they belong in the spec rather than added afterwards.
✦ Not sure of your size? Send us the product and we measure it and build the dieline.
Pricing & minimums.
We price Mylar Comic Bags per specification rather than from a fixed list, because the same build in two different finishes can land at very different numbers. Below is what actually moves the price, so you can shape the spec before you request a quote.
The single biggest lever. Unit cost falls sharply as volume rises, because setup and tooling spread across more pieces.
Board weight and stock choice change both the raw material cost and the shipping weight of the finished run.
Foil, spot UV, embossing and soft-touch each add a pass on press. One or two lift the box; five compound the cost.
Full-bleed print inside and out costs more than a one-sided design on natural stock.
Foam, moulded pulp, velvet pillows, magnets and ribbon are priced per piece on top of the box itself.
Standard production is the base rate. Rush moves you up the production queue and carries a surcharge.
✦ Quotes returned within 24 hours.
Questions, answered.
Everything you need to know about Mylar Comic Bags.
A true mylar sleeve is archival polyester, free of the plasticisers and acids that migrate out of cheaper film. PP and PVC sleeves yellow, embrittle and off-gas over time. Polyester does none of that, so the bag does nothing to the book across decades of storage.
That chemical stability is the entire reason to specify it.
2 mil for general collection storage, 4 mil for long-term archiving of key issues. The lighter gauge is clear, flexible and sensible for volume bagging. The 4 mil film is stiffer, holds its shape in a box and gives better support to a high-value book.
Both are acid-free and both pair with a backing board.
Current and Modern books take roughly 6⅞ × 10½ inches, Silver Age 7 × 10½, Golden Age 7¾ × 10½ and magazines 8 × 10½. Trim sizes changed across eras, so a single sleeve does not fit every book cleanly. Custom dimensions are available for anything outside those standards.
No, the sleeve alone will not stop a flex, which is what the backing board is for. An acid-free board sits behind the book inside the bag and provides the rigidity. Everything in contact with the paper, board included, is acid-free.
We supply boards cut to the same era sizes as the bags.
The flap folds over the opening and carries an adhesive strip on the flap itself, never on the book. It opens and closes without residue and keeps dust and light out. A plain open-top sleeve with no flap is the cheapest option for high-volume bagging.
Yes, a small logo or shop name is printed on the sleeve edge. The film is optically clear as standard, because the cover has to read through it without haze, so the mark stays off the face. A UV-filtering film is available for books stored or displayed in daylight.
Sleeves are supplied from 500 units, packed in bulk. Retailer-marked runs use the same minimum, with pricing tiered above 1,000 for dealers and stores bagging stock at volume. Quantities up to 100,000 are available on one order. Sizing to a non-standard trim is handled free.
Standard turnaround is 7 to 10 business days, and the rush service is 5 to 7 business days. A sample in 5 to 7 business days lets you check clarity, gauge and how the flap sits on a real book before ordering.
The sample fee is credited back on the production order, and we ship anywhere in the USA.
Other products you might love.
Ready to start your Mylar Comic Bags project?
Get a free quote in 24 hours. Our atelier is here to help.





